Maintenance Message Classe in A320 Aircrafts - THE AVIATION

Maintenance Message Classe in A320 Aircrafts

 In a very simple way .. Maintenance Message Classe in airbus a320 aircrafts.

figure attached are generic..

CLASS 1 maintenance message:

Are the Faults with operational cockpit event (cockpit effect) all faults having a cockpit effect and detected by the systems

Class 1 maintenance messages are presented in the Post Flight Report at the end of the flight.

CLASS 2 maintenance messages:

Are the Faults triggering an ECAM MAINTENANCE STATUS.

- Have no consequence on the system operating conditions. Dispatch is permitted without condition, except if mentionned in MMEL section MI-00-08. 

- Must be fixed at the first opportunity and not later than the "rectification interval" required as per MMEL section MI-00-05 "Repair Interval".

- Recording of these faults in the Logbook is the trigger to start the countdown of the corresponding MMEL rectification.

Class 2 maintenance messages are presented in the Post Flight Report at the end of the flight.

Class 3 fault messages:

Are the Faults without cockpit event.

- All faults detected by the systems without cockpit event.

- Have no consequence on the system operating conditions and the crew is not aware of them.

Class 3 maintenance messages are not shown on the PFR.